Virtual Storage

This view represents the activity of the virtual storage devices.

The grid located at the top of the window shows each individual virtual storage device with the following information for each one:

Read KBytes / sec This counter represents the total number of Kbytes that have been read per second on this virtual device.
Write KBytes / sec This counter represents the total number of Kbytes that have been written per second on this virtual device.
Read count/ sec This counter represents the total number of read operations that have occured on this virtual device per second
Write count/ sec This counter represents the total number of write operations that have occured on this virtual device per second.
Error count/ sec This counter represents the total number of errors that have occured on this virtual device per second.
Flush count/ sec This counter represents the total number of flush operations that have occured on this virtual device per second.

By default, the last snapshot is displayed in the grid. Use the slidder (or the arrow buttons) located at the top of the grid to navigate through the collected snapshots. In monitoring, the "Auto-Update" button must be unchecked to be able to navigate through the collected snapshots.

Select one or more virtual storage devices in the grid (Check box at the left of the grid) to update the graphes located at the bottom of the window. If several entries are selected, the statistics are aggregated.


See also:





Go back to the Learning center:


Copyright © AgileLoad. All rights reserved.
Agile Load testing tool| Contact AgileLoad | Terms of Use | Sitemap